空间站燃烧科学实验系统设计

建立空间站燃烧实验系统，可满足未来空间微重力燃烧实验系统需求.通过空间站微重力燃烧实验研究，可拓展空间燃烧学研究.根据所要实现的功能及燃烧实验需求，对中国空间站燃烧柜的燃烧科学实验系统进行了设计和分析.燃烧科学实验系统由8个子系统组成，是一个适合开展气、液、固多种燃料燃烧实验的综合性实验系统.考虑到强度设计要求，在完成方案设计后，对系统进行了有限元分析，并在研制的结构件上进行了力学环境实验.实验与分析结果表明，本文设计的实验系统能够满足环模实验的要求，结构合理可行.      

压电阻抗技术监测固体推进剂老化研究

为了进一步研究表面粘贴式的主动传感技术——压电阻抗技术(EMI, Electro-Mechanical Impedance)监测固体推进剂的老化,构建了基于线粘弹杆结构的一维机电耦合模型,根据粘弹性波的理论与边界条件进行分析,建立一种线粘弹结构动态模量与其机械阻抗的表征关系,并对构建的机电耦合阻抗模型进行了数值计算及试验验证。针对HTPB固体推进剂开展高温热加速老化试验及压电主动激励试验,根据监测所得导纳频谱并通过提取结构机械阻抗进行分析,结果表明:压电陶瓷片与推进剂结构在高频机电耦合运动时(300kHz,280kHz)有明显的共振现象,结构固有频率高于机电耦合共振频率,并且在200kHz～400kHz频段与700kHz～900kHz频段内,结构机械阻抗频谱峰值会因固体推进剂的热老化时间增长而降低,且与热老化时间之间满足线性关系。由此可见,压电阻抗法能够与固体推进剂在力学性能上建立表征关系,通过得到固体推进剂结构机械阻抗能够监测其老化损伤。     

Review and propositions for the sliding/impact wear behavior in a contact interface

A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior. It results in contact damage until systems fail, which may cause significant economic losses and catastrophic consequences. The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment. This has been a hot topic in the area of mechanical reliability. The main work in this paper can be concluded as follows. Firstly, the main industries in which the “sliding/impact behavior” takes place have been introduced. Then, existing studies on the wear mechanism and degree analysis are presented, which includes surface morphology analysis, wear debris analysis, and wear degree measurement. Meanwhile, existing problems in theoretical modeling and experiments in current research are summarized, so as to point out a bright direction for future research on wear prediction. They include interface contact modeling, mathematic coupling mechanism modeling, wear equation establishment, and wear life characterization, which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

弱引力下小行星动量驱动机器人的可控跳跃行为

以小行星表面着陆探测为背景,提出一种动量驱动机器人(MoRo)以满足弱引力复杂环境下的探测需求。该机器人利用弱引力环境下的摩擦和碰撞特性,通过主动辨识环境参数,规划和控制动量轮以产生期望的驱动力矩,完成可控性跳跃及腾空后的稳定拍照等任务。首先,基于MoRo的动量轮刹车机构特性,分析了MoRo在弱引力环境下的跳跃机理并对其跳跃方式进行了规划;接着考虑动量轮驱动机构三闭环伺服系统的非线性特性,基于Herze碰撞模型和Karnopp摩擦模型建立了MoRo在小行星表面的跳跃行为动力学模型;其次,使用机器学习算法建立环境参数和MoRo运动的函数关系,并基于环境参数规划动量轮转速实现跳跃距离和腾空高度的可控。最后,通过数值仿真校验了MoRo跳跃规划方法和控制方法的可行性。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

不同酚醛树脂对芳纶纸蜂窝性能的影响

为研究酚醛树脂对芳纶纸蜂窝性能的影响,本文采用两种不同的酚醛树脂制备芳纶纸蜂窝芯材,对所制备蜂窝芯材的压缩性能和剪切性能进行测试,同时结合蜂窝端面树脂分布观察、树脂与芳纶纸接触角测量等方法,分析了两种树脂所制备蜂窝芯材性能出现差异的原因,结果表明：树脂中溶剂水的挥发速度、树脂与芳纶纸之间的表面张力会影响树脂在蜂窝壁上的树脂分布;蜂窝芯材树脂含量相同时,其节点两侧的树脂胶柱有利于提高蜂窝芯材压缩强度,但树脂堆积在节点后会降低蜂窝壁厚,造成蜂窝的剪切强度和模量下降。     

面向系统集成的起落架地面运动特性建模方法

大型飞机地面运动特性是飞机性能的重要组成部分,主要涉及到飞机的地面滑跑、转弯以及刹车等过程。地面运动特性的分析涉及到动力学、液压、控制等多领域,是典型的多学科耦合的复杂问题。以某大型民用飞机为研究对象,从主制造商的系统集成性能分析需求出发,通过多学科解耦和模型物理度划分两个角度进行地面特性模型架构的分解与定义,并以飞机刹车系统性能分析为例,验证了本架构的有效性。本文提出的模型架构灵活,既适用于飞机集成商的飞机级性能分析,又适用于特定系统级的性能分析。